DRAMeXchange - Price, Transactions, and research inside DRAM/Flash industry

It is currently Fri Apr 10, 2020 4:05 pm

All times are UTC + 8 hours





Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Winbond will Start Its Specific DRAM 12-inch Foundry and Put 58nm Process into Production
PostPosted: Mon Feb 25, 2008 7:21 pm 

Joined: Fri Jan 11, 2008 10:59 pm
Posts: 315
In order to effectively lower the manufacturing cost meanwhile to provide higher capacity to meet the clients’ needs, Winbond Electronics will start its 12-inch foundry of specific DRAM formally in 2008. At present, PSC Inc. is the only 12-inch specific DRAM foundry in Taiwan, Winbond’s decision to enter into 12-inch outsourcing confronts the company with PSC directly. Spokesman of Winbond Electronics declared that at present, the company has started to trial-produce 12-inch specific DRAM and it is predicted that the requirements will reach several thousand pieces every month in 2008. Winbond in 2008 will mainly focus on the process technology transition instead of capacity expansion, thus will require a not too large sum of capital and in 3Q this year, the company will start its trial-produce of 58nm process, keeping ahead of other Taiwan foundries.
 
As to process transition, Winbond is believed to start its 70nm process trial-production this month and up to the middle of 2008, the company will start 70nm mass production. 58nm process trial-production will be started in 3Q and predicted to enter volume production in 2009. As for specific DRAM, 80nm process and 70nm process will be jumped over and the company will directly puts 58nm process into production, first DRAM maker to do so in Taiwan.


Top
 Profile  
 
 Post subject: Re: Winbond will Start Its Specific DRAM 12-inch Foundry and Put 58nm Process into Production
PostPosted: Thu Dec 21, 2017 6:24 pm 

Joined: Thu Dec 21, 2017 5:46 pm
Posts: 128
As to process transition, Winbond is believed to start its 70nm process trial-production this month and up to the middle of 2008, the company will start 70nm mass production Process
Production
Foundry
Specific
Winbond
Character
Exchange Exchange
Transaction Prices
Post United
Posted Containing Mouse
Graded Best-wishes
58nm process trial-production will be started in 3Q and predicted to enter volume production in 2009. As for specific DRAM, 80nm process and a 70nm process will be jumped over and the company will directly put the 58nm process into production, first DRAM maker to do so in Taiwan.


Top
 Profile  
 
 Post subject: Re: Winbond will Start Its Specific DRAM 12-inch Foundry and Put 58nm Process into Production
PostPosted: Fri Feb 14, 2020 4:34 pm 

Joined: Fri Feb 14, 2020 3:19 pm
Posts: 3
Winbond in 2008 will principally concentrate on the procedure innovation progress rather than limit extension, in this manner will require a not very enormous entirety of capital and in 3Q this year, the organization will begin its preliminary produce of 58nm procedure, keeping in front of other Taiwan foundries. Also check how to add Kodi


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 8 hours



Who is online

Users browsing this forum: jacobwiliams675 and 133 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
© 2011 DRAMeXchange, a Business Division of TrendForce Corp. All rights reserved.